Installation

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING RECEIVER: INSTALLATION

1. INSTALL TIRE PRESSURE WARNING ANTENNA AND RECEIVER

(a) Engage the 2 tabs into the holes as shown in the illustration and install the tire pressure warning antenna and receiver.





(b) Install the bolt.

Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)

(c) Connect the connector to the tire pressure warning antenna and receiver.

2. INSTALL CENTER PILLAR UPPER GARNISH LH

HINT
Use the same procedure for the LH side as for the RH side Installation.

3. INSTALL FRONT SEAT OUTER BELT ASSEMBLY LH

HINT
Use the same procedure for the LH side as for the RH side Installation.

4. INSTALL SIDE NO. 1 TRIM ASSEMBLY LH

HINT
Use the same procedure for the LH side as for the RH side Installation.

5. INSTALL DECK TRIM SIDE BELT HOLE COVER LH

HINT
Use the same procedure for the LH side as for the RH side Installation.

6. INSTALL REAR DECK TRIM COVER Installation

7. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

8. INSTALL FRONT DOOR SCUFF PLATE LH

HINT
Use the same procedure for the LH side as for the RH side Installation.

9. INSTALL REAR SEAT ASSEMBLY

Installation

10. INSPECT TIRE PRESSURE WARNING SYSTEM

Test Mode Procedure