Operation CHARM: Car repair manuals for everyone.
Home >> Scion >> 2012 >> tC L4-2.5L (2AR-FE) >> Repair and Diagnosis >> Body and Frame >> Locks >> Trunk / Liftgate Lock >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation





DOOR LOCK: BACK DOOR LOCK: INSTALLATION

1. INSTALL BACK DOOR LOCK ASSEMBLY

NOTICE:
* When installing a new back door lock assembly, if there is any tape stuck to it, remove the tape.
* When installing a new back door lock assembly, if there are any strings attached to it, cut the strings off.

(a) Temporarily install the back door lock assembly by temporarily installing the 3 bolts in alphabetical order.





(b) Tighten the 3 bolts in alphabetical order.

Torque : 8.0 Nm (82 kgf-cm, 70 in-lbf)

(c) Attach the clamp.

(d) Connect the connector.

2. INSTALL BACK DOOR TRIM BOARD ASSEMBLY Reassembly

3. INSTALL BACK DOOR SIDE GARNISH LH Reassembly

4. INSTALL BACK DOOR SIDE GARNISH RH Reassembly

5. INSTALL BACK DOOR CENTER GARNISH Reassembly
pro multis · About Operation CHARM