Trunk / Liftgate Lock: Testing and Inspection

DOOR LOCK: BACK DOOR LOCK: INSPECTION

1. INSPECT BACK DOOR LOCK ASSEMBLY

(a) Check the operation of the door lock motor.

(1) Move the latch to the full-latch position.





(2) Apply battery voltage to the back door lock assembly terminals and check the operation of the latch.

OK:





If the result is not as specified, replace the back door lock assembly.

Text in Illustration





(b) Check the operation of the door courtesy switch.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





If the result is not as specified, replace the back door lock assembly.