Disassembly

LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: DISASSEMBLY

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. REMOVE TAIL AND STOP LIGHT BULB

(a) Turn the socket in the direction indicated by the arrow and remove it.





(b) Remove the bulb.

2. REMOVE REAR TURN SIGNAL LIGHT BULB

(a) Turn the socket in the direction indicated by the arrow and remove it.





(b) Remove the bulb.

3. REMOVE BACK UP LIGHT BULB

(a) Turn the socket in the direction indicated by the arrow and remove it.





(b) Remove the bulb.

4. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH