Fluid - M/T: Service and Repair

EB60 MANUAL TRANSMISSION / TRANSAXLE: MANUAL TRANSAXLE OIL: REPLACEMENT

1. DRAIN MANUAL TRANSAXLE OIL

(a) Remove the filler plug and gasket.





Text in Illustration





(b) Remove the drain plug and gasket to drain the manual transaxle oil.

(c) Install a new gasket and the drain plug.

Torque : 39 Nm (400 kgf-cm, 29 ft-lbf)

2. ADD MANUAL TRANSAXLE OIL

(a) Add manual transaxle oil until the oil level is within 5 mm (0.196 in.) from the bottom of the filler plug opening.





Text in Illustration





(b) Install a new gasket and the filler plug.

Torque : 39 Nm (400 kgf-cm, 29 ft-lbf)

NOTICE:
* When adding transaxle oil, make sure that the vehicle is level.
* An excessively large or small amount of oil may cause problems.
* After adding oil, drive the vehicle and recheck the oil level.

3. INSPECT FOR OIL LEAK