Installation
TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING ECU: INSTALLATION
1. INSTALL TIRE PRESSURE WARNING ECU
(a) Connect the connector.
(b) Install the tire pressure warning ECU with the screw.
2. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
Installation
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
4. PERFORM DIAGNOSTIC SYSTEM CHECK
Reading and Clearing Diagnostic Trouble Codes
5. REGISTER TRANSMITTER ID
Registration
6. INSPECT TIRE PRESSURE WARNING SYSTEM
Test Mode Procedure
7. PERFORM INITIALIZATION
Initialization