Disassembly

2AR-FE STARTING: STARTER: DISASSEMBLY

1. REMOVE MAGNET STARTER SWITCH ASSEMBLY

(a) Remove the nut and disconnect the lead wire from the magnet starter switch.





(b) Remove the 2 nuts holding the magnet starter switch to the repair service starter kit.





(c) Remove the magnet starter switch.

2. REMOVE STARTER YOKE ASSEMBLY

(a) Remove the 2 through-bolts and pull out the starter yoke together with the starter commutator end frame.





(b) Remove the starter yoke from the starter commutator end frame.





3. REMOVE STARTER ARMATURE PLATE

(a) Remove the starter armature plate from the starter yoke.





4. REMOVE STARTER COMMUTATOR END FRAME COVER

(a) Using a screwdriver, pry out the starter commutator end frame cover to remove it.





5. REMOVE STARTER ARMATURE ASSEMBLY

(a) Using snap ring pliers, remove the snap ring and washer.





Text in Illustration





(b) Remove the starter armature from the starter commutator end frame.

NOTICE:
Do not drop the starter armature.

6. REMOVE RUBBER SEAL

(a) Remove the rubber seal from the repair service starter kit.





7. REMOVE PLANETARY GEAR

(a) Remove the 3 planetary gears from the repair service starter kit.