Washer Fluid Level Switch: Testing and Inspection

WIPER / WASHER: WASHER LEVEL WARNING SWITCH: INSPECTION

1. INSPECT LEVEL WARNING SWITCH ASSEMBLY

HINT
The following check should be performed with the windshield washer motor and pump installed to the washer jar.

(a) Fill the washer jar with washer fluid.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

HINT
When the fluid volume is between 500 and 900 cc (30.5 and 54.9 cu.in.), the level warning switch may be on or off.

Text in Illustration

If the result is not as specified, replace the level warning switch assembly.