Operation CHARM: Car repair manuals for everyone.
Home >> Scion >> 2012 >> xD L4-1.8L (2ZR-FE) >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Rear Speed Sensor >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation





BRAKE CONTROL: REAR SPEED SENSOR: INSTALLATION

1. INSTALL REAR AXLE HUB AND BEARING ASSEMBLY (REAR SPEED SENSOR)

(a) Install the rear axle hub and bearing onto the axle beam with the 4 bolts.

Torque : 90 Nm (918 kgf-cm, 66 ft-lbf)

2. INSPECT REAR AXLE HUB BEARING Rear Axle Hub

3. CONNECT SPEED SENSOR WIRE Installation

4. INSTALL REAR BRAKE DRUM SUB-ASSEMBLY

5. ADJUST REAR DRUM BRAKE SHOE CLEARANCE Installation

6. INSTALL REAR WHEEL

Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)

7. INSPECT REAR WHEEL ALIGNMENT

Rear Wheel Alignment

8. CHECK VSC SENSOR SIGNAL

Test Mode Procedure
pro multis · About Operation CHARM