Installation

DOOR LOCK: DOOR CONTROL RECEIVER: INSTALLATION; 2013 MY FR-S [03/2012 -]

1. INSTALL DOOR CONTROL RECEIVER

(a) Engage the guide and install the door control receiver.

(b) Install the bolt.

Torque : 13 Nm (133 kgf-cm, 10 ft-lbf)

(c) Connect the connector.

NOTICE:
* Do not drop the door control receiver or apply impact on it.
* When replacing or inspecting the door control receiver, do not change the wiring route or the length of the harness around the receiver.
* When the door control receiver is replaced with a new one, register the wireless door lock control system ID Registration and tire pressure warning receiver ID Programming and Relearning.

2. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY

(a) Engage the 4 clips and install the package tray trim panel assembly with the center stop light assembly.

(b) Install the 4 clips.

(c) Connect the connector.

3. INSTALL REAR WINDOW SIDE GARNISH LH Installation

4. INSTALL REAR WINDOW SIDE GARNISH RH

HINT
Use the same procedure described for the LH side.

5. INSTALL QUARTER TRIM LID SUB-ASSEMBLY LH Installation

6. INSTALL QUARTER TRIM LID SUB-ASSEMBLY RH

HINT
Use the same procedure described for the LH side.

7. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH Installation

8. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH

HINT
Use the same procedure described for the LH side.

9. CONNECT LUGGAGE COMPARTMENT INNER TRIM COVER LH Installation

10. CONNECT LUGGAGE COMPARTMENT INNER TRIM COVER RH

HINT
Use the same procedure described for the LH side.

11. INSTALL FRONT DOOR SCUFF PLATE LH Installation

12. INSTALL FRONT DOOR SCUFF PLATE RH

HINT
Use the same procedure described for the LH side.

13. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH Installation

14. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

HINT
Use the same procedure described for the LH side.

15. INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY LH Installation

16. INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY RH Installation