Reassembly
INTERIOR PANELS / TRIM: UPPER INSTRUMENT PANEL: REASSEMBLY; 2013 MY FR-S [03/2012 -]
1. INSTALL INSTRUMENT PANEL CUSHION
(a) Install a new instrument panel cushion.
2. INSTALL NO. 1 DEFROSTER NOZZLE GARNISH
(a) Engage the 16 claws and 8 guides to install the No. 1 defroster nozzle garnish.
3. INSTALL INSTRUMENT PANEL REGISTER BEZEL (for LH Side)
(a) Engage the 3 claws to install the instrument panel register bezel.
4. INSTALL INSTRUMENT PANEL REGISTER BEZEL (for RH Side)
HINT
Use the same procedure as for the LH side.
5. INSTALL NO. 2 INSTRUMENT PANEL REGISTER SUB-ASSEMBLY
(a) Engage the 3 claws to install the No. 2 instrument panel register sub-assembly.
6. INSTALL NO. 1 INSTRUMENT PANEL REGISTER SUB-ASSEMBLY
HINT
Use the same procedure as for the No. 2 instrument panel register sub-assembly.
7. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY
(a) Engage the 2 clips.
(b) Install the center instrument panel register assembly with the 2 screws.
8. INSTALL NO. 3 DEFROSTER NOZZLE GARNISH
(a) Engage the 2 claws to install the No. 3 defroster nozzle garnish.
9. INSTALL NO. 2 DEFROSTER NOZZLE GARNISH
HINT
Use the same procedure as for the No. 3 defroster nozzle garnish.
10. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT
(a) Engage the 2 claws to install the No. 2 side defroster nozzle duct.
11. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT
HINT
Use the same procedure as for the No. 2 side defroster nozzle duct.
12. INSTALL DEFROSTER NOZZLE ASSEMBLY
(a) Engage the 5 claws.
(b) Install the defroster nozzle assembly, No. 2 side defroster nozzle duct, and No. 1 side defroster nozzle duct as a single unit with the screws.
13. INSTALL NO. 2 HEATER TO REGISTER DUCT
(a) Engage the claw.
(b) Install the No. 2 heater to register duct with the 3 screws.
14. INSTALL NO. 1 HEATER TO REGISTER DUCT
HINT
Use the same procedure as for the No. 2 heater to register duct.