Installation

DOOR LOCK: FRONT DOOR LOCK: INSTALLATION; 2013 MY FR-S [03/2012 -]

HINT
Use the same procedure for the RH and LH sides.

1. INSTALL FRONT DOOR LOCK ASSEMBLY

NOTICE:
Do not allow grease or dust to adhere to the surface of the connector which contacts the door lock wire harness seal.

(a) Apply MP grease to the sliding parts of the front door lock assembly.

(b) Insert the front door lock open rod into the front door lock assembly.

(c) Check that the front door lock open rod is securely connected to the front door lock assembly.

(d) Install the front door lock assembly with the 3 new bolts.

Torque : 6.5 Nm (66 kgf-cm, 58 in-lbf)

2. INSTALL FRONT DOOR LOCK CYLINDER ASSEMBLY (for Driver Side) Front Door Reassembly

3. INSTALL FRONT DOOR REAR LOWER FRAME SUB-ASSEMBLY Front Door Reassembly

4. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY Front Door Reassembly

5. INSTALL FRONT DOOR WEATHERSTRIP Front Door Reassembly

6. INSTALL FRONT DOOR SERVICE HOLE COVER Front Door Reassembly

7. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY Front Door Reassembly

8. INSTALL DOOR ARMREST COVER Front Door Reassembly

9. INITIALIZE POWER WINDOW CONTROL SYSTEM

Programming and Relearning

10. INSPECT POWER WINDOW OPERATION

Operation Check