Component Tests and General Diagnostics
MIRROR (EXT): OUTER REAR VIEW MIRROR: INSPECTION; 2013 MY FR-S [03/2012 -]
1. INSPECT OUTER REAR VIEW MIRROR SUB-ASSEMBLY RH
(a) Check the operation of the mirror surface.
(1) Disconnect the outer rear view mirror sub-assembly RH connector.
(2) Apply battery voltage and check the operation of the mirror.
OK:
If the result is not as specified, replace the outer rear view mirror sub-assembly RH.
(b) Check the operation of the mirror heater (w/ Mirror Heater).
(1) Disconnect the outer rear view mirror sub-assembly RH connector.
(2) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the outer rear view mirror sub-assembly RH.
(3) Connect the cable from the positive (+) terminal to terminal 4 (+) and the negative battery (-) terminal to terminal 10 (-), then check that the mirror becomes warm.
HINT
It takes a short time for the mirror to become warm.
OK:
Mirror becomes warm.
If the result is not as specified, replace the outer rear view mirror sub-assembly RH.
2. INSPECT OUTER REAR VIEW MIRROR SUB-ASSEMBLY LH
(a) Check the operation of the mirror surface.
(1) Disconnect the outer rear view mirror sub-assembly LH connector.
(2) Apply battery voltage and check the operation of the mirror.
OK:
If the result is not as specified, replace the outer rear view mirror sub-assembly LH.
(b) Check the operation of the mirror heater (w/ Mirror Heater).
(1) Disconnect the outer rear view mirror sub-assembly LH connector.
(2) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the outer rear view mirror sub-assembly LH.
(3) Connect the cable from the positive (+) terminal to terminal 4 (+) and the negative battery (-) terminal to terminal 10 (-), then check that the mirror becomes warm.
HINT
It takes a short time for the mirror to become warm.
OK:
Mirror becomes warm.
If the result is not as specified, replace the outer rear view mirror sub-assembly LH.