Reading and Clearing Diagnostic Trouble Codes

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM: DTC CHECK / CLEAR; 2013 MY FR-S [03/2012 -]

1. DTC CHECK/CLEAR

(a) Check for DTCs.

(1) Turn the ignition switch off.

(2) Connect the Techstream to the DLC3.

(3) Turn the ignition switch to ON.

(4) Turn the Techstream on.

(5) Read the DTCs following the prompts on the Techstream. Enter the following menus: Chassis / ABS/VSC/TRAC / Trouble Codes.

(6) Check the details of the DTCs Vehicle Stability Control System.

(b) Clear the DTCs.

(1) Turn the ignition switch off.

(2) Connect the Techstream to the DLC3.

(3) Turn the ignition switch to ON.

(4) Turn the Techstream on.

(5) Operate the Techstream to clear the codes. Enter the following menus: Chassis / ABS/VSC/TRAC / Trouble Codes.

2. END OF DTC CHECK/CLEAR

(a) Start the engine.

(b) Check that the ABS warning and slip indicator lights go off within approximately 3 seconds after starting the engine.