Brakes and Traction Control: Service Precautions
BRAKE SYSTEM (OTHER): BRAKE SYSTEM: PRECAUTION; 2013 MY FR-S [03/2012 -]
NOTICE:
* Take extra care to replace each part properly. Improper installation or repair could affect the performance of the brake system and cause a driving hazard.
* It is very important to keep the brake system parts and the work area clean when repairing the brake system.
* If the vehicle is equipped with a mobile communication system, refer to the Precautions in the Introduction information.
* Care must be taken when using magnets as they could affect the performance of the speed sensors.
* Since the brake line is one of the critical safety-related parts, be sure to disassemble the components if a brake fluid leak is found. If any abnormality is found, replace the component with a new one.
* When removing brake components, cover the brake tube connections to prevent foreign matter such as dust or dirt from entering the tubes.
* Do not damage or deform the brake tubes when removing or installing them.
* Do not deform the bracket and the body when connecting a brake line and flexible hose.
* When installing a brake tube grommet to the body, make sure that the brake tube passes through the center of the grommet.
* When installing a brake tube or flexible hose, make sure that it is not twisted or bent.
* If the fitting of the flexible hose does not match the groove on the bracket, twist the hose slightly to insert it.
* Flexible hoses must be free from absorber oil, grease, etc.
* When installing a brake tube to a plastic clamp, make sure that the brake tube is not loose or being pinched.
* Do not reuse a clip or plastic clamp removed from a flexible hose.
* After installing a brake tube and flexible hose, make sure that they do not interfere with any other components.
* Do not allow brake fluid to adhere to any painted surface such as the vehicle body. If brake fluid leaks onto any painted surface, immediately wash it off.