Fuel Gauge Sender: Testing and Inspection

FA20 FUEL: FUEL SENDER GAUGE ASSEMBLY: INSPECTION; 2013 MY FR-S [03/2012 -]

1. INSPECT FUEL SENDER GAUGE ASSEMBLY

CAUTION:
Take special care of fire.

(a) Inspect to see if there is any damage to the fuel sender gauge assembly.

(b) Measure the dimensions between the fuel tank seat face and the float center with the float position at F (upper end) and at E (lower end).









Dimensions





(c) Check that the float moves smoothly between F (upper) and E (lower).

(d) Measure the resistance according to the value(s) in the table below.









Standard Resistance:





If the value is not as specified, replace the fuel sender gauge assembly.

2. INSPECT NO. 2 FUEL SENDER GAUGE ASSEMBLY

CAUTION:
Take special care of fire.

(a) Inspect to see if there is any damage to the No. 2 fuel sender gauge assembly.

(b) Measure the dimensions between the fuel tank seat face and the float center with the float position at F (upper end) and at E (lower end).









Dimensions





(c) Check that the float moves smoothly between F (upper) and E (lower).

(d) Measure the resistance according to the value(s) in the table below.









Standard Resistance:





If the value is not as specified, replace the fuel sender gauge assembly.