Reading and Clearing Diagnostic Trouble Codes

METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR; 2013 MY FR-S [03/2012 -]

1. CHECK DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Combination Meter / DTC.

(e) Check DTCs and then write them down.

HINT
Refer to the Techstream operator's manual for further details.

(f) Confirm the details of the DTCs.

2. CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON (do not start the engine).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Combination Meter / DTC / Clear.

HINT
Refer to the Techstream operator's manual for further details.

(e) Clear DTCs by pressing the YES button on the tester.

HINT
Refer to the Techstream operator's manual for further details.