Meter / Gauge / Display
METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: Fuel Gauge Malfunction; 2013 MY FR-S [03/2012 -]
- Fuel Gauge Malfunction
DESCRIPTION
The combination meter assembly controls the fuel receiver gauge in accordance with the resistance of the fuel sender gauge, which varies depending on the amount of fuel remaining in the fuel tank.
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
1. CONFIRM DTC OUTPUT
(a) Check DTC Reading and Clearing Diagnostic Trouble Codes.
Result
B -- GO TO DIAGNOSTIC TROUBLE CODE CHART Meter / Gauge System
A -- Continue to next step.
2. PERFORM ACTIVE TEST USING TECHSTREAM (FUEL METER OPERATION)
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Combination Meter / Active Test.
(e) According to the display on the tester, perform the Active Test.
Combination Meter
NG -- REPLACE COMBINATION METER ASSEMBLY Removal
OK -- Continue to next step.
3. READ VALUE USING TECHSTREAM (FUEL INPUT) B1500
NG -- INSPECT FUEL SENDER GAUGE ASSEMBLY
OK -- REPLACE COMBINATION METER ASSEMBLY Removal
4. INSPECT FUEL SENDER GAUGE ASSEMBLY B1500
B -- REPLACE FUEL SENDER GAUGE ASSEMBLY Removal
A -- Continue to next step.
5. INSPECT FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE B1500
B -- REPLACE FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE Removal
A -- Continue to next step.
6. REPLACE NO. 2 FUEL SENDER GAUGE ASSEMBLY B1500
B -- REPLACE NO. 2 FUEL SENDER GAUGE ASSEMBLY Removal
A -- Continue to next step.
7. REPLACE FUEL TANK RETURN TUBE SUB-ASSEMBLY B1500
B -- REPLACE FUEL TANK RETURN TUBE SUB-ASSEMBLY Removal
A -- Continue to next step.
8. CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE) B1500
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
9. CHECK HARNESS AND CONNECTOR (FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE - FUEL TANK RETURN TUBE SUB-ASSEMBLY) B1500
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
10. CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - FUEL TANK RETURN TUBE SUB-ASSEMBLY) B1500
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE COMBINATION METER ASSEMBLY Removal