Disassembly
LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: DISASSEMBLY; 2013 MY FR-S [03/2012 -]
HINT
Use the same procedure for the RH and LH sides.
1. REMOVE REAR COMBINATION LIGHT GASKET LH
(a) Remove the rear combination light gasket LH.
HINT
* Be sure to remove all the traces of the old rear combination light gasket from the body.
* Do not reuse the removed packing. Be sure to install a new rear combination light gasket to prevent water ingress.
2. REMOVE REAR TURN SIGNAL LIGHT BULB
(a) Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.
(b) Remove the rear turn signal light bulb from the rear combination light socket and wire sub-assembly.
3. REMOVE REAR SIDE MARKER LIGHT BULB
(a) Turn the rear combination light socket and wire sub-assembly with the rear side marker light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.
(b) Remove the rear side marker light bulb from the rear combination light socket and wire sub-assembly.
4. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY
(a) Disengage the clamp.
(b) Disconnect the connector.
(c) Disengage the 2 clamps to remove the rear combination light socket and wire sub-assembly.