Installation

LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: INSTALLATION; 2013 MY FR-S [03/2012 -]

HINT
Use the same procedure for the RH and LH sides.

1. INSTALL REAR COMBINATION LIGHT ASSEMBLY

(a) Engage the guide to temporarily install the rear combination light assembly.

(b) Tighten the 4 nuts in the order shown in the illustration to install the rear combination light assembly.





Torque : 4.5 Nm (46 kgf-cm, 40 in-lbf)

(c) Engage the 2 grommets to connect the rear combination light socket and wire sub-assembly.

(d) Connect the connector.

2. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH Installation

3. INSTALL REAR FLOOR FINISH PLATE

(a) Engage the 4 claws to install the rear floor finish plate.

(b) Install the 3 clips.

4. INSTALL LUGGAGE COMPARTMENT FLOOR MAT