Installation

METER / GAUGE / DISPLAY: LIGHT CONTROL RHEOSTAT: INSTALLATION; 2013 MY FR-S [03/2012 -]

1. INSTALL LIGHT CONTROL RHEOSTAT

(a) Engage the 2 claws to install the light control rheostat.

2. INSTALL SWITCH BASE

(a) Engage the 4 claws to install the switch base.

3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

(a) Connect each connector.

(b) Engage the 4 claws.

(c) Engage the 4 clips to install the No. 1 instrument panel under cover sub-assembly.

(d) Install the 2 screws.

4. INSTALL INSTRUMENT SIDE PANEL LH Installation