Removal
LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: REMOVAL; 2013 MY FR-S [03/2012 -]
HINT
Use the same procedure for the RH and LH sides.
1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT
2. REMOVE REAR FLOOR FINISH PLATE
(a) Using a clip remover, remove the 3 clips.
(b) Disengage the 4 claws to remove the rear floor finish plate.
3. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER LH Removal
4. REMOVE REAR COMBINATION LIGHT ASSEMBLY
(a) Disconnect the connector.
(b) Disengage the 2 grommets and disconnect the wire harness.
(c) Remove the 4 nuts.
(d) Disengage the guide to remove the rear combination light assembly.