Reading and Clearing Diagnostic Trouble Codes

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING SYSTEM: DTC CHECK / CLEAR; 2013 MY FR-S [03/2012 -]

1. CHECK DTC (for DOOR CONTROL RECEIVER)

(a) Turn the ignition switch off.

(b) Connect the Techstream to the DLC3.

(c) Turn the ignition switch to ON.

(d) Turn the Techstream on.

(e) Enter the following menus: Chassis / Tire Pressure Monitor / Trouble Codes.

(f) Read the DTCs.

2. CHECK DTC (for MAIN BODY ECU (NETWORK GATEWAY ECU))

(a) Turn the ignition switch off.

(b) Connect the Techstream to the DLC3.

(c) Turn the ignition switch to ON.

(d) Turn the Techstream on.

(e) Enter the following menus: Body Electrical / Main Body / Trouble Codes.

(f) Read the DTCs.

3. CLEAR DTC (for DOOR CONTROL RECEIVER)

HINT
After repairing the malfunctions, clear the DTCs.

(a) Turn the ignition switch off.

(b) Connect the Techstream to the DLC3.

(c) Turn the ignition switch to ON.

(d) Turn the Techstream on.

(e) Enter the following menus: Chassis / Tire Pressure Monitor / Trouble Codes.

(f) Clear DTCs following the prompts on the Techstream screen.

HINT
Refer to the Techstream operator's manual for further details.

4. CLEAR DTC (for MAIN BODY ECU (NETWORK GATEWAY ECU))

HINT
After repairing the malfunctions, clear the DTCs.

(a) Turn the ignition switch off.

(b) Connect the Techstream to the DLC3.

(c) Turn the ignition switch to ON.

(d) Turn the Techstream on.

(e) Enter the following menus: Body Electrical / Main Body / Trouble Codes.

(f) Clear DTCs following the prompts on the Techstream screen.

HINT
Refer to the Techstream operator's manual for further details.