Operation CHARM: Car repair manuals for everyone.
Home >> Scion >> 2013 >> FR-S F4-2.0L (FA20) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Manifold Pressure/Vacuum Sensor >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






FA20 ENGINE CONTROL: VACUUM SENSOR: INSTALLATION; 2013 MY FR-S [03/2012 -]

1. INSTALL MANIFOLD ABSOLUTE PRESSURE SENSOR

(a) Apply a light coat of engine oil to a new O-ring and install it to the manifold absolute pressure sensor.

(b) Install the manifold absolute pressure sensor with the bolt.

Torque : 4.0 Nm (41 kgf-cm, 35 in-lbf)

NOTICE:
* If a component has been dropped or subjected to a strong impact, replace it.
* Make sure that the O-ring is not damaged or does not jump out of position during installation.

(c) Connect the manifold absolute pressure sensor connector.

2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY Installation

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL Installation
pro multis · About Operation CHARM