Operation CHARM: Car repair manuals for everyone.
Home >> Scion >> 2013 >> FR-S F4-2.0L (FA20) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Transmission Position Sensor/Switch >> Service and Repair >> TL70 Manual Transmission / Transaxle >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






TL70 MANUAL TRANSMISSION / TRANSAXLE: NEUTRAL POSITION SWITCH: INSTALLATION; 2013 MY FR-S [03/2012 -]

1. INSTALL NEUTRAL POSITION SWITCH ASSEMBLY

(a) Using a 19 mm union nut wrench, install the neutral position switch assembly with a new gasket to the manual transmission assembly.

Torque : 32 Nm (329 kgf-cm, 24 ft-lbf)

NOTICE:
Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench Service Precautions.

(b) In the order indicated in the illustration, engage the 3 clamps in place, and connect the back-up light switch assembly wire and neutral position switch assembly wire.





HINT
Install the wire harness so that there is slack on the connector side.

2. INSTALL MANUAL TRANSMISSION ASSEMBLY

Installation
pro multis · About Operation CHARM