Removal

TX6A AUTOMATIC TRANSMISSION / TRANSAXLE: PARK / NEUTRAL POSITION SWITCH: REMOVAL; 2013 MY FR-S [03/2012 -]

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL Removal

2. REMOVE FRONT EXHAUST PIPE ASSEMBLY

Removal

3. DISCONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY

(a) Remove the clip and pin the floor shift gear shifting rod sub-assembly from the transmission control shaft lever RH.





4. REMOVE TRANSMISSION CONTROL SHAFT LEVER RH

(a) Remove the nut, spring washer and the transmission control shaft lever RH.





5. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY

(a) Disconnect the park/neutral position switch connector.

(b) Using a screwdriver, bend the tabs of the lock washer.





(c) Remove the nut and the lock washer from the park/neutral position switch assembly.





(d) Remove the bolt and the park/neutral position switch assembly.





HINT
Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch assembly as the detent spring may become detached from the manual valve lever shaft.