Installation
FA20 EMISSION CONTROL: CANISTER: INSTALLATION; 2013 MY FR-S [03/2012 -]
1. INSTALL CHARCOAL CANISTER ASSEMBLY
(a) Install the canister base bracket to the charcoal canister assembly with 2 nuts.
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
(b) Install the charcoal canister assembly with canister base bracket with the 2 bolts and the nut.
Bolt - Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)
Nut - Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
(c) Connect the drain hose D as indicated by the arrows, in the order shown in the illustration.
(d) Connect the drain hose C as shown in the illustration.
2. INSTALL CANISTER PUMP MODULE
(a) Install the drain hose E.
(b) Connect the drain hose A and the drain hose B.
(c) Engage the clamp.
(d) Install the nuts and bracket B.
Torque : 18 Nm (184 kgf-cm, 13 ft-lbf)
(e) Install the 2 nuts and bracket A.
Torque : 18 Nm (184 kgf-cm, 13 ft-lbf)
(f) Engage the clip.
(g) Install the check valve with 3 bolts.
Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)
(h) Connect the evaporation hose to the fuel pipe assembly.
(i) Engage the clip.
(j) Connect the drain hose A to the fuel filler pipe.
(k) Connect the drain hose B to the charcoal canister assembly.
3. INSTALL REAR SUSPENSION MEMBER SUB-ASSEMBLY
Installation
4. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY
Installation