Operation CHARM: Car repair manuals for everyone.
Home >> Scion >> 2013 >> FR-S F4-2.0L (FA20) >> Repair and Diagnosis >> Powertrain Management >> Fuel Delivery and Air Induction >> Fuel Pressure Sensor/Switch >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






FA20 FUEL: FUEL PRESSURE SENSOR: INSTALLATION; 2013 MY FR-S [03/2012 -]

1. INSTALL FUEL INJECTOR ASSEMBLY

NOTICE:
Be sure to use a new fuel delivery pipe and new fuel pressure sensor. Installation

2. INSTALL FUEL DELIVERY PIPE (for Bank 1)

(a) Install the fuel delivery pipe (for Bank 1) with the 2 bolts.

Torque : 19 Nm (194 kgf-cm, 14 ft-lbf)

3. INSTALL FUEL PRESSURE SENSOR

(a) Temporarily install the new fuel pressure sensor by hand as much as possible to the fuel delivery pipe (for Bank 1).

(b) Tighten the fuel pressure sensor.

Torque : 58 Nm (591 kgf-cm, 43 ft-lbf)

NOTICE:
* Ensure that no oil adheres to the threads of the fuel pressure sensor and No. 1 fuel delivery pipe sub-assembly RH.
* Do not allow any foreign matter to adhere when installing the fuel pressure sensor.
* Once the fuel pressure sensor is tightened to the specified torque, do not retighten or recheck it.

(c) Connect the fuel pressure sensor connector and 2 fuel injector connectors.

4. INSTALL FUEL DELIVERY PIPE Installation

5. INSTALL INTAKE MANIFOLD

Installation
pro multis · About Operation CHARM