Disassembly
FA20 FUEL: FUEL PUMP: DISASSEMBLY; 2013 MY FR-S [03/2012 -]
NOTICE:
* Do not disconnect the hose indicated in the illustration.
* When replacing the fuel filter assembly, replace it together with the fuel suction plate sub-assembly.
1. REMOVE FUEL SENDER GAGE ASSEMBLY Removal
2. REMOVE NO. 1 FUEL SUB-TANK
(a) Disconnect the fuel pump connector.
(b) Hold the fuel suction plate sub-assembly in the direction of the arrow as shown in the illustration.
(c) Using needle nose plier, remove the E-ring.
(d) Using a screwdriver with the tip taped, disengage the claw and separate the jet pump nozzle.
(e) Using a screwdriver with the tip taped, disengage the 3 claws and separate the No. 1 fuel sub-tank.
NOTICE:
Do not damage the No. 1 fuel sub-tank or the fuel filter.
(f) Using a screwdriver with the tip taped, disengage the claw and separate the jet pump.
(g) Remove the O-ring from the No. 1 fuel sub-tank.
3. REMOVE FUEL PUMP ASSEMBLY
(a) Using 2 screwdrivers with the tip taped, disengage the 2 claws.
(b) Using a screwdriver with the tip taped, disengage the 3 claws and remove the fuel pump.
NOTICE:
Do not damage the fuel pump or the fuel filter.
(c) Disconnect the connector, and remove the fuel pump wire harness.
(d) Remove the O-ring and fuel pump spacer from the fuel pump assembly.
4. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY
(a) Remove the fuel pressure regulator assembly from the fuel filter.
(b) Remove the 2 O-ring and backup ring from the fuel pressure regulator assembly.