Reassembly

FA20 FUEL: FUEL PUMP: REASSEMBLY; 2013 MY FR-S [03/2012 -]

1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

(a) Apply a light coat of gasoline to new 2 O-rings, and install the 2 O-rings and backup ring to the fuel pressure regulator assembly.









(b) Install the fuel pressure regulator assembly to the fuel filter.





2. INSTALL FUEL PUMP ASSEMBLY

(a) Install the new O-ring and fuel pump spacer to the fuel pump assembly.









(b) Connect the new fuel pump wire harness to the fuel pump assembly.

(c) Apply a light coat of gasoline to a seal, and install it to the fuel pump assembly.





(d) Attach the 5 claws of the fuel filter to install the fuel pump assembly.

NOTICE:
When installing the seal, make sure that it does not become pinched or cut.

3. INSTALL NO. 1 FUEL SUB-TANK

(a) Set the fuel suction plate sub-assembly to the No. 1 fuel sub-tank using the spring.

(b) Apply a light coat of gasoline to a new O-ring and install the O-ring to the jet pump.









(c) Install the jet pump to the No. 1 fuel sub-tank.

NOTICE:
* When installing the O-ring, make sure that it does not become pinched or cut.
* Securely attach the claws.

(d) Attach the 3 claws to install the fuel filter assembly to the No. 1 fuel sub-tank.





(e) Attach the claw to install the jet pump nozzle to the No. 1 fuel sub-tank.





(f) Install a new E-ring.





(g) Connect the fuel pump connector.





4. INSTALL FUEL SENDER GAGE ASSEMBLY Installation