Inspection
FA20 FUEL: FUEL PUMP: INSPECTION; 2013 MY FR-S [03/2012 -]
1. INSPECT FUEL PUMP ASSEMBLY
(a) Inspect the resistance of the fuel pump assembly.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the fuel pump assembly.
(b) Inspect the operation of the fuel pump assembly.
(1) Connect a battery's negative (-) lead to terminal 3 of the connector, and a positive (+) lead to terminal 4. Check that the fuel pump operates.
NOTICE:
* These tests must be performed within 10 seconds to prevent the coil from burning out.
* Keep the fuel pump as far away from the battery as possible.
* Always turn on and off the voltage on the battery side, and not on the fuel pump side.