Installation

FA20 FUEL: FUEL PUMP ECU: INSTALLATION; 2013 MY FR-S [03/2012 -]

1. INSTALL FUEL PUMP CONTROL ECU ASSEMBLY

(a) Attach the fuel pump control ECU assembly bracket to the body attachment hole, and pass the stud bolt through the hole in the body.

(b) Install the fuel pump control ECU assembly with the nut.

Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)

NOTICE:
Do not reuse the fuel pump control ECU assembly if it has been subjected to shocks.

(c) Connect the fuel pump control ECU assembly connector.

2. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH Installation

3. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH Installation

4. INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY RH Installation

5. INSTALL FRONT DOOR SCUFF PLATE RH Installation

6. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH Installation

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL Installation