Operation CHARM: Car repair manuals for everyone.
Home >> Scion >> 2013 >> FR-S F4-2.0L (FA20) >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Camshaft Position Sensor >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






FA20 ENGINE CONTROL: CAMSHAFT POSITION SENSOR: INSTALLATION; 2013 MY FR-S [03/2012 -]

1. INSTALL VVT SENSOR (for Exhaust Side of Bank 2)

(a) Apply a light coat of engine oil to the new O-ring of the VVT sensor.

(b) Install the VVT sensor with the bolt.

Torque : 6.4 Nm (65 kgf-cm, 57 in-lbf)

(c) Connect the VVT sensor connector.

2. INSTALL NO. 1 ENGINE UNDER COVER Installation

3. INSTALL VVT SENSOR (for Intake Side of Bank 2)

(a) Apply a light coat of engine oil to the new O-ring of the VVT sensor.

(b) Install the VVT sensor with the bolt.

Torque : 6.4 Nm (65 kgf-cm, 57 in-lbf)

(c) Connect the VVT sensor connector

4. INSTALL VVT SENSOR (for Exhaust Side of Bank 1)

(a) Apply a light coat of engine oil to the new O-ring of the VVT sensor.

(b) Install the VVT sensor with the bolt.

Torque : 6.4 Nm (65 kgf-cm, 57 in-lbf)

(c) Connect the VVT sensor connector.

5. INSTALL VVT SENSOR (for Intake Side of Bank 1)

(a) Apply a light coat of engine oil to the new O-ring of the VVT sensor.

(b) Install the VVT sensor with the bolt.

Torque : 6.4 Nm (65 kgf-cm, 57 in-lbf)

(c) Connect the VVT sensor connector.

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL Installation
pro multis · About Operation CHARM