Installation
TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING RECEIVER: INSTALLATION; 2013 MY FR-S [03/2012 -]
HINT
The tire pressure warning receiver is integrated in the door control receiver.
1. INSTALL DOOR CONTROL RECEIVER
(a) Engage the guide and install the door control receiver.
(b) Install the bolt.
Torque : 13 Nm (133 kgf-cm, 10 ft-lbf)
(c) Connect the connector.
NOTICE:
* Do not drop the door control receiver or apply impact on it.
* When replacing or inspecting the door control receiver, do not change the wiring route or the length of the harness around the receiver.
HINT
* It is necessary to perform registration of the transmitter IDs into the tire pressure warning ECU after the ECU has been replaced Registration.
* When replacing the door control receiver on vehicles, be sure to perform Registration of Recognition Code to register the transmitter IDs after ECU replacement Programming and Relearning.
2. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY Installation
3. INSTALL REAR WINDOW SIDE GARNISH LH Installation
4. INSTALL REAR WINDOW SIDE GARNISH RH
HINT
Use the same procedure described for the LH side.
5. INSTALL QUARTER TRIM LID SUB-ASSEMBLY LH Installation
6. INSTALL QUARTER TRIM LID SUB-ASSEMBLY RH
HINT
Use the same procedure described for the LH side.
7. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH Installation
8. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH
HINT
Use the same procedure described for the LH side.
9. CONNECT LUGGAGE COMPARTMENT TRIM INNER COVER LH Installation
10. CONNECT LUGGAGE COMPARTMENT TRIM INNER COVER RH
HINT
Use the same procedure described for the LH side.
11. INSTALL FRONT DOOR SCUFF PLATE LH Installation
12. INSTALL FRONT DOOR SCUFF PLATE RH
HINT
Use the same procedure described for the LH side.
13. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH Installation
14. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
HINT
Use the same procedure described for the LH side.
15. INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY LH Installation
16. INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY RH
HINT
Use the same procedure described for the LH side.
17. INSPECT TIRE PRESSURE WARNING SYSTEM
Test Mode Procedure