Removal
BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: STEERING ANGLE SENSOR: REMOVAL; 2013 MY FR-S [03/2012 -]
1. REMOVE STEERING WHEEL ASSEMBLY
Removal
2. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD
3. REMOVE INSTRUMENT SIDE PANEL LH Removal
4. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal
5. REMOVE METER HOOD SUB-ASSEMBLY Removal
6. REMOVE UPPER INSTRUMENT PANEL METER ORNAMENT Removal
7. REMOVE NO.1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal
8. INSPECT SPIRAL CABLE SUB-ASSEMBLY Removal
9. REMOVE LOWER STEERING COLUMN COVER Removal
10. REMOVE UPPER STEERING COLUMN COVER Removal
11. REMOVE SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY Removal
12. REMOVE STEERING SENSOR
NOTICE:
* Remove the steering sensor from the spiral cable sub-assembly only when replacing it or the steering sensor.
* Do not rotate the center section of the steering sensor, as it may deviate from the steering sensor neutral point.
* When replacing the spiral cable sub-assembly: Removal
(a) Disengage the 6 claws, 2 pins and 2 guides to remove the steering sensor from the spiral cable sub-assembly.
NOTICE:
Do not damage the guide and claw.