Installation
FA20 ENGINE CONTROL: CAMSHAFT POSITION SENSOR: INSTALLATION; 2013 MY FR-S [03/2012 -]
1. INSTALL VVT SENSOR (for Exhaust Side of Bank 2)
(a) Apply a light coat of engine oil to the new O-ring of the VVT sensor.
(b) Install the VVT sensor with the bolt.
Torque : 6.4 Nm (65 kgf-cm, 57 in-lbf)
(c) Connect the VVT sensor connector.
2. INSTALL NO. 1 ENGINE UNDER COVER Installation
3. INSTALL VVT SENSOR (for Intake Side of Bank 2)
(a) Apply a light coat of engine oil to the new O-ring of the VVT sensor.
(b) Install the VVT sensor with the bolt.
Torque : 6.4 Nm (65 kgf-cm, 57 in-lbf)
(c) Connect the VVT sensor connector
4. INSTALL VVT SENSOR (for Exhaust Side of Bank 1)
(a) Apply a light coat of engine oil to the new O-ring of the VVT sensor.
(b) Install the VVT sensor with the bolt.
Torque : 6.4 Nm (65 kgf-cm, 57 in-lbf)
(c) Connect the VVT sensor connector.
5. INSTALL VVT SENSOR (for Intake Side of Bank 1)
(a) Apply a light coat of engine oil to the new O-ring of the VVT sensor.
(b) Install the VVT sensor with the bolt.
Torque : 6.4 Nm (65 kgf-cm, 57 in-lbf)
(c) Connect the VVT sensor connector.
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL Installation