Front Lower
FRONT SUSPENSION: FRONT LOWER SUSPENSION ARM: INSPECTION; 2013 MY FR-S [03/2012 -]
MAINTENANCE: CHASSIS: GENERAL MAINTENANCE; 2013 MY FR-S [03/2012 -]
Front Lower Ball Joint Wear Limit
Inspect the state of rotation of the ball joint
With the brake pedal depressed, attempt to move the top and bottom of the front tire in the axial direction, and confirm that there is no play.
If there is any play, replace the front lower suspension arm assembly LH
With the brake pedal released, attempt to move the top and bottom of the front tire in the axial direction, and confirm that there is no play
If there is any play, replace the front axle hub
Install the nut to the front lower suspension arm assembly LH stud
Turn the stud back and forth
Standard No unusual resistance or play
If there is any unusual resistance or play, replace the front lower suspension arm assembly LH with a new one
Inspect the dust cover
Check that the dust cover is not cracked and that there is no grease on it
If the dust cover is cracked or there is grease on it, replace the front lower suspension arm assembly LH with a new one
Jack up the front of the vehicle and place wooden blocks with a height of 180 to 200 mm (7.09 to 7.87 in.) under the front tires
Jack up the lower suspension arm until there is about half a load on the front suspension
Check that the front wheels are pointing straight ahead
Using a lever, pry up the end of the lower arm. Check the amount of play
Maximum ball joint vertical play 0 mm (0 in.)
Check the dust cover for damage