Operation CHARM: Car repair manuals for everyone.
Home >> Scion >> 2013 >> FR-S F4-2.0L (FA20) >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Clutch Switch >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






CLUTCH: CLUTCH PEDAL SWITCH: INSTALLATION; 2013 MY FR-S [03/2012 -]

1. INSTALL CLUTCH START SWITCH ASSEMBLY

(a) Install the clutch start switch assembly to the clutch pedal support sub-assembly with the nut.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(b) Connect the clutch start switch connector.

(c) With the clutch pedal fully depressed, check that the clearance shown in the illustration is as specified.









Standard clearance:

3.5 to 4.0 mm (0.138 to 0.157n.)

HINT
Do not turn the clutch start switch assembly.

2. INSTALL CLUTCH PEDAL SUPPORT SUB-ASSEMBLY

Installation

3. INSTALL CLUTCH SWITCH ASSEMBLY

(a) Install the clutch switch assembly to the clutch pedal support sub-assembly with the nut.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(b) Connect the clutch switch connector.

(c) Without depressing the clutch pedal, check that there is no clearance between the switch shaft and the clutch pedal stopper.









HINT
Do not turn the clutch switch assembly.

4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

5. INSTALL INSTRUMENT SIDE PANEL LH Installation

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL Installation

7. INSPECT CLUTCH START SYSTEM Initial Inspection and Diagnostic Overview
pro multis · About Operation CHARM