Removal

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING RECEIVER: REMOVAL; 2013 MY FR-S [03/2012 -]

HINT
The tire pressure warning receiver is integrated in the door control receiver.

1. REMOVE SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY LH Removal

2. REMOVE SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY RH

HINT
Use the same procedure described for the LH side.

3. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH Removal

4. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH

HINT
Use the same procedure described for the LH side.

5. REMOVE FRONT DOOR SCUFF PLATE LH Removal

6. REMOVE FRONT DOOR SCUFF PLATE RH

HINT
Use the same procedure described for the LH side.

7. SEPARATE LUGGAGE COMPARTMENT INNER TRIM COVER LH Removal

8. SEPARATE LUGGAGE COMPARTMENT INNER TRIM COVER RH

HINT
Use the same procedure described for the LH side.

9. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH Removal

10. REMOVE LUGGAGE COMPARTMENT TRIM COVER RH

HINT
Use the same procedure described for the LH side.

11. REMOVE QUARTER TRIM LID SUB-ASSEMBLY LH Removal

12. REMOVE QUARTER TRIM LID SUB-ASSEMBLY RH

HINT
Use the same procedure described for the LH side.

13. REMOVE REAR WINDOW SIDE GARNISH LH Removal

14. REMOVE REAR WINDOW SIDE GARNISH RH

HINT
Use the same procedure described for the LH side.

15. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY Removal

16. REMOVE DOOR CONTROL RECEIVER

(a) Disconnect the connector.





(b) Remove the bolt.

(c) Disengage the guide and remove the door control receiver.

NOTICE:
* Do not drop the door control receiver or apply impact on it.
* When replacing or inspecting the door control receiver, do not change the wiring route or the length of the harness around the receiver.