Removal

AXLE AND DIFFERENTIAL: FRONT AXLE HUB: REMOVAL; 2013 MY FR-S [03/2012 -]

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. REMOVE FRONT WHEEL

2. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY Replacement

3. REMOVE FRONT DISC Removal

4. DISCONNECT FRONT SPEED SENSOR LH

(a) Remove the bolt and disconnect the front speed sensor LH from the steering knuckle.





NOTICE:
Clean the speed sensor installation hole and the contact surfaces every time the front speed sensor LH is removed.

5. REMOVE FRONT AXLE HUB SUB-ASSEMBLY LH

(a) Remove the 4 bolts and front axle hub sub-assembly LH from the steering knuckle.