Reassembly

TL70 MANUAL TRANSMISSION / TRANSAXLE: INPUT SHAFT: REASSEMBLY; 2013 MY FR-S [03/2012 -]

1. INSTALL FRONT INPUT SHAFT BEARING

(a) Using SST and a press, as shown in the illustration, install a new front input shaft bearing to the input shaft.









SST : 09527-20011

SST : 09950-60010

09951-00560

NOTICE:
Retain the front input shaft bearing inner race, and press fit.

(b) Select a front bearing shaft snap ring that is suitable to retain the specific thrust clearance between the front input shaft bearing and front bearing shaft snap ring.





Standard clearance:

0 mm (0 in.)

Maximum clearance:

0.1 mm (0.00394 in.)

Front Bearing Shaft Snap Ring Thickness





(c) Using a brass bar and a hammer, install a new front bearing shaft snap ring to the input shaft.

2. INSTALL NO. 3 SYNCHRONIZER RING

(a) Apply manual transmission gear oil to the No. 3 synchronizer ring, and then install the No. 3 synchronizer ring to the input shaft.





3. INSTALL INPUT SHAFT BEARING

(a) Apply manual transmission gear oil to the input shaft bearing, and then install the input shaft bearing to the input shaft.