Installation

WINDOW / GLASS: POWER WINDOW REGULATOR MOTOR: INSTALLATION; 2013 MY FR-S [03/2012 -]

HINT
Use the same procedure for both the RH and LH sides.

1. INSTALL POWER WINDOW REGULATOR MOTOR ASSEMBLY

(a) Using a T25 "TORX" socket wrench, install the power window regulator motor assembly with the 3 screws.

Torque : 6.0 Nm (61 kgf-cm, 53 in-lbf)

2. INSTALL FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY Front Door Reassembly

3. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY Front Door Reassembly

4. INSTALL FRONT DOOR REAR LOWER FRAME SUB-ASSEMBLY Front Door Reassembly

5. ADJUST FRONT DOOR GLASS SUB-ASSEMBLY

(a) Check the front door glass sub-assembly Adjustments.

(b) Adjust the front door glass sub-assembly Adjustments.

6. INSTALL FRONT DOOR SERVICE HOLE COVER Front Door Reassembly

7. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side) Front Door Reassembly

8. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side) Front Door Reassembly

9. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY Front Door Reassembly

10. INSTALL DOOR ARMREST COVER Front Door Reassembly

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 6.0 Nm (61 kgf-cm, 53 in-lbf)

12. INITIALIZE POWER WINDOW CONTROL SYSTEM

Programming and Relearning

13. INSPECT POWER WINDOW OPERATION

Testing and Inspection