AR40.20-P-0322-02MCC Check Camber, Assign Tabular Value

AR40.20-P-0322-02MCC Check Camber, Assign Tabular Value

The camber on the front axle is measured at toe 0° and it is dependent on the vehicle level.
Different vehicle levels make it therefore necessary to determine the camber specified value based on a camber table as follows:

^ Determine level of front axle using electronic level gauge.
The level value is displayed by the electronic level gauge in decimal degrees only (Romess value).

The tolerance is ±0° 30'
Maximum camber difference between left and right is 0° 30'.

Example:
Level of front axle : 2° (value on level measuring device)
Camber specified value : 0° 25' (determined from camber table)