AR40.20-P-0322-03MCC Check Caster And Assign To Tabular Value

AR40.20-P-0322-03MCC Check Caster And Assign To Tabular Value

The caster is measured between a 20° wheel angle to the right and a 20° wheel angle to the left, and varies according to the vehicle level.
Different vehicle levels therefore make it necessary to determine the specified caster value based on a caster table as follows:

^ Determine level of front axle and level of rear axle using the electronic inclinometer.
The level value is displayed by the electronic level gauge in decimal degrees only (Romess value).

The tolerance is 0° 30'
Maximum caster difference between left and right is 0° 30'.

Example:
Level at front axle (VA) : 3° (value on level measuring device)
Level at rear axle (HA) : 1° (value on level measuring device)
Specified caster value : 8° 15' (determined from the caster table)