AR40.20-P-0322-11MCC Check Toe And Assign To Tabular Value

AR40.20-P-0322-11MCC Check Toe And Assign To Tabular Value

The total toe of the front and rear axle is dependent on the vehicle level.
Different vehicle levels make it therefore necessary to determine the total toe specified value based on a total toe table as follows:

^ Determine level of front axle or rear axle using the electronic inclinometer.
The level value is displayed by the electronic level gauge in decimal degrees only (Romess value).

Front axle
The total toe tolerance is ±0° 18'
The individual toe tolerance is ±0°' 09'

Rear axle
The total toe tolerance is ±0° 20'
The individual toe tolerance is ±0°' 15'
Maximum difference of individual toe-in between left and right is 0° 30'.

Example:
Level of front axle : 3.0° (value read on inclinometer)
Total toe value : 0° 48' (determined from the total toe table).