AR67.10-P-1600-03MCC Finish Windshield Repair

AR67.10-P-1600-03MCC Finish Windshield Repair







1 Tool holder
2 Clamping lever
3 Inspection mirror
4 Milling cutter
5 Stone impact cracker
6 UV curing lamp
7 bow-shaped blade
8 Filler resin
9 Finish resin
10 Injector
11 Curing foil
12 Cleaning agents
13 Adhesion gel
14 Finish polish

1 Remove curing foil (11).
2 Scrape off cured finish resin (9) on windshield using bow-shaped blade (7).
To achieve good repair results, move bow-shaped blade (7) at an angle of exactly 90° to windshield by weaving crosswise above damaged point.
Scraped finish resin (9) is visible as mat or gray surface.
Shining resin surfaces are located deeper and not yet sufficiently filled and must be treated with finish resin (9).
3 Apply a drop of finish resin (14) to scraped finish resin surface and polish to transparent finish using polishing cloth from repair kit.
To achieve good repair results, a small quantity of dry finish polish (14) should already be present on the polishing cloth.
The final result is a shining transparent point, similar to a dried rain drop.
4 Clean repair surfaces using cleaning agent (12).