Rear

EXC. 4 WHEEL DRIVE

1. Apply parking brake and loosen wheel lug nuts.
2. Raise and support rear of vehicle.
3. Remove wheel and tire assembly.
4. Flatten lock washer and loosen axle nut, then remove lock washer and lock plate.
5. On models equipped with disc brakes, unfasten caliper assembly and position aside.
6. On all models, remove hub and drum or hub and rotor assembly.
7. Reverse procedure to install.

4 WHEEL DRIVE

1. Apply parking brake.
2. Remove wheel cap and cotter pin, then loosen castle nut and lug nuts.
3. Raise and support vehicle.
4. Remove wheel and tire assembly.
5. On models equipped with disc brakes, unfasten caliper assembly and position aside, leaving brake line attached.
6. On all models, remove castle nut, then the hub and drum or hub and rotor assembly.
7. Reverse procedure to install.