Camber

Fig. 1 Caster & camber measurement:

Ensure tires are properly inflated prior to checking or adjusting camber angles.

FRONT

Front camber angles are not adjustable, however, the following procedure may be used to ensure camber is within specifications.
1. Raise front of vehicle and position turning radius gauges under front wheels, then lower vehicle.
2. Install suitable adapter and gauge into center of wheel and measure camber angle, Fig. 1.
3. If camber is not within specifications, inspect suspension components for damage and repair as necessary, then recheck.

REAR

Rear camber angle cannot be adjusted. If camber is not within specifications, inspect suspension components for damage and replace as necessary.