Oxygen Sensor - Special Tool Modification

88subaru02

NUMBER 14-10-88


DATE 01-25-88
1988 CALIFORNIA SPECIFICATION TURBO VEHICLES

SUBJECT: SPECIAL TOOL ADAPTATION FOR TITANIA

O2 SENSOR REMOVAL

FIGURE 1:

A Titania O2 Sensor is used on 1988 California Specification Turbo vehicles. Because of the size of the 3 wire connector, the O2 Sensor wrench 499990110 cannot be used without modification.

To modify the existing wrench by cutting a slit in the socket at the handle side as outlined below, see figure 1. This will eliminate the need for a separate special tool.