A/C - Installation Precaution

86subaru06

NUMBER 10-54-89


DATE 11-27-89
APPLICABILITY '89 GL XT MODELS


SUBJECT: ACCESSORY AIR CONDITIONER KIT S0A332A112


INSTALLATION PROCEDURE UPDATE

When installing the condenser assembly, remove the protective line cap on the outlet or receiver/dryer pipe first. Then remove the cap located on the discharge or inlet pipe.


CAUTION:
Make sure the entire protective cap and rubber inner seal is removed. If the tip end of the rubber inner seal remains lodged in the condenser, permanent damage to the A/C system may result. Because the condenser will be restricted by the seal tip being lodged inside and high side or discharge pressure may increase to levels which can damage the compressor assembly.


Please advise all Port personnel of this precaution.